🏷️ FilaMan Installation
NFC Filament Manager for ESP32
⚠️ Browser Requirement: This installation only works with Google Chrome or Microsoft Edge. Safari and Firefox are not supported.
📋 Prerequisites
- ESP32 Development Board
- USB Cable (data cable, not charge-only!)
- Chrome or Edge Browser
- Windows: CP210x or CH340 USB drivers (if needed)
🚀 Start Installation
Click the button and connect your ESP32 via USB.
❌ Your browser is not supported. Please use Chrome or Edge.
❌ This page must be accessed via HTTPS.
📝 After Installation:
1
Restart ESP32 - Briefly disconnect the USB connection
2
Configure WiFi - The ESP32 opens a WiFi hotspot "FilaMan-XXXXXX". Connect to it and open http://192.168.4.1
3
Open Web Interface - After WiFi configuration, access FilaMan at http://filaman.local on your network
4
Connect NFC Reader - Connect the PN532 NFC reader and calibrate the scale
🔄 Updates
- Future updates can be installed directly through the FilaMan web interface (OTA)
- No USB connection needed for updates!