🚀 Install Now
Install FilaMan directly from your browser - no VSCode or PlatformIO required!
Go to Browser Installation →✨ Features
Multi-Color Support
Visual display of multi-color filaments with accurate color representation
ACE Pro NFC Tags
Full support for Bambu Lab ACE Pro NFC tags with hybrid format
Spoolman Integration
Seamless API integration for centralized filament management
Scale Calibration
Automatic tare function and precise weight measurement
Bambu Lab MQTT
Direct integration with Bambu Lab printers via MQTT
OTA Updates
Firmware updates directly through the web interface - no USB needed
🔧 Installation & Setup
- Browser Installation: Use our Web Flasher for easy initial installation
- WiFi Configuration: After first boot, the ESP32 opens a hotspot "FilaMan-XXXXXX"
- Web Interface: Access via
http://filaman.localon your network - Updates: Future updates are done conveniently through the web interface (OTA)
📦 Required Hardware
- ESP32 Development Board (e.g. ESP32 DevKitC)
- PN532 NFC Reader (I2C or SPI)
- HX711 Load Cell with Weight Sensor (optional for weight measurement)
- USB Cable for initial installation
📚 About This Project
FilaMan is an enhanced fork of ManuelW77/Filaman with numerous improvements for modern 3D printers and filament management systems. The project enables reading, editing, and creating NFC tags for 3D printer filaments, especially for Bambu Lab printers and compatible systems.
